LAUNCH X431 VII+ & CR319 OBD2 Diagnostic Tool Scanner Auto Code Reader ABS SRS

Description: LAUNCH X431 VII+ & CR319 OBD2 Diagnostic Tool Scanner Auto Code Reader ABS SRS✅ Free Gift:EL50448 TPMS Reset Relearn Tool Auto Tire Pressure Monitor Sensor*1LAUNCH X431 Creader VII+ Car Code Reader EOBD, OBD2 Scanner Scan Tool Testing Engine/Transmission/ABS/ Airbag System Update via PCAbout this itemPOWERFUL DIAGNOSTIC UTILITY - Tests Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.PRAGMATIC DTC DIAGNOSIS - Provides DTC help and service information, DTC reading and clearing displays, tests Oxygen sensor and carbon canister ,and displays OBDII Data Stream Graphic, offers easy DIY convenience.EXTENSIVE VEHICLE APPLICATION - Covering more than 20 main car models in America, Europe and Asia Pacific regions, suitable for OBDII standard after 1996, supports all 10 test modes of OBDII protocol,compatible with masses of car makes.CONVENIENT UPDATE VIA PC - Updating software can be downloaded from website: mycar dot x431 dot com, which is only compatible with PC with Windows XP or Windows 7 system. Easy to read with multilingual menu, including Chinese,English,French,Spanish.BROAD COVERAGE OF CAR MODELS - Asian car models: Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu.USA car models: Ford, GM, Chrysler.European car models: Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Seat, Skoda, Audi, Porsche, Saab, Jagua.What does the LAUNCH Creader VII+ obd2 scanner do for you? Warm Notice:If the screen shows "Lib files are not exist!" , this is because the TF card is not inserted properly, or the connection between the diagnostic cable and the car is unstable. Please take the TF card off, re-download the software, and reinsert the TF card into the tool.Please don't register the device on LAUNCH official website. At present, all LAUNCH scanners don't need to go to the official website to register, which can be registered on the device or on the update tool. LAUNCH Creader VII+ OBD2 Scanner highlights:4 Systems Diagnoses: LAUNCH scanner VII+ can read/erase generic and manufacturer specific codes, view live data stream and turn off the warning lights in the Engine system, Transmission system, ABS and SRS.Retrives Manufacturer Specific Enhanced Data for Domestic, Asian and European vehiclesFull OBDII Functions: The obd2 scanner features all 10 OBDII test modes, such as I/M Readiness, Live Data Stream (in graphic format), O2 Sensor Test, On-board Monitor Test, etc.User-friendly Design: LAUNCH scan tool VII+ has an ergonomic handheld design with 3.5” TFT display, user-friendly button layout, and a wear-resistant housing, for simplicity and durability.Fast and Intuitive Operations: LAUNCH VII+ OBDII scanner has a fast and intuitive operation through an easy-to-use interface and responsive operating system.Wide Compatibilities: The vehicle code reader is compliant with all the OBDII protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO14230), and CAN (Control Area Network ISO 11898).Multilingual Built-in DTC Lookup: LAUNCH VII+ is equipped with a built-in DTC library combined with multilingual menu, including English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese.Supports data recording and playing back, Graph, record, and replay data in full color.Provides lifetime free online update service.Send and Prints data via PCSupport 8 languages: English, Spanish, French, German, Italian, Russian, Japanese, PortuguesePOWERFUL functions: Engine/Transmission/ABS/SRS Systems Diagnostics Compared to other 95% OBD2 scanner in the market, LAUNCH Creader vii+ can also work on Transmission System , while many other Same types of Scanners DOES NOT work on Transmission System .For Engine SystemThe scan tool LAUNCH creader vii+ can read/erase codes and view live data in the engine system to help you easily determine the cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off warning light to make sure the engine works properly.For Auto Transmission SystemThe OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep the transmission system’s output optimally adapted to the speed and load. Knowing the exact cause of a transmission’s woes means you can get it repaired as quickly as possible and at minimal expense to you.For ABS (Anti-lock Braking System)With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system. It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.For SRS (Airbag)Read and clear fault code in SRS (Airbag) and turn off warning light of airbag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (airbag) to ensure it works fine.View Live Data Graphing of Engine/AT/Airbag/ABS System4 Live Data Stream Analyse in 1 Graph:This OBDII code reader has big size LCD color screen. it also shows live vehicle sensors data in text, multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters of Engine & AT & Airbag & ABS System.10 OBDII Test ModesThe LAUNCH code reader Creader VII+ is an enhanced scan tool specially designed for most 1996 and newer OBDII-compliant vehicles. Compared to basic OBD2 scanner/code readers, it provides complete OBDII diagnostics, including:√Read and Clear DTCs: Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information.√Turn-off Malfunction Indicator Light (MIL).√Read I/M Readiness Status: Show whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.√Read Live Data Stream:Show the information of continuous data stream from vehicle in live graphic (waveform) display.√Read Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.√O2 Sensor Test:Show the last results of O2 sensor test in graphic display for troubleshooting.√On-Board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.√Read Vehicle Information:Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.√EVAP Test for Fuel Tank System (Carbon canister test).How to Register and Update This Scan Tool? (Tips: Free Update for Life-long time) There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable.Step 1: Go to LAUNCH official website (refer to the "User Guide" in the "Product guides and documents "section of product webpage) and click Updating Tool Download icon.Step 2: Download and install the Creader VII+ updating tool and launch the program when installed.Step 3: Enter the Product Serial Number (located at the back of the tool), and hit [Upgrade] and enter the register page, type your email address and "Register Code" (check the "Register Code" on the "Help--Tool Information" menu), then hit [Submit].Note: the “User password” is equal to the “Register Code.”Step 4: Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer.Step 5: Reopen the Creader VII+ Updating tool, select the updates you would like to preform or click “Select All” and click Download to start downloading.Step 6: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.Languages Support To shorten the distance between you and us and let you have a better user experience, we’ve 100% localized the interface into 8 languages: English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese.Generate & Print Diagnostic Report After running the diagnosis, the LAUNCH Creader VII+ obd2 scanner will automatically save all of the information about the parts working condition, sensor data and freeze frame and you can go through it by viewing the live data stream. If you are confused with result of the diagnostic report, you can share it with your peers, friends or even us for help!DTC Lookup We have prepared an in-built DTC library for you to search the specific definition of DTCs so that it saves you the trouble to copy-past and google it on PC.Compatible Car Models:Asian:for Suzuki, for Honda, for Mitsubishi, For Nissan, For Toyota, for Mazda, for Hyundai, for KIA, for Subaru, for Infiniti, for lexus, for Acura, for ISUZU.America:for Ford, for GM, for Chrysler.Europe:for Benz, for BMW, for VW, for Opel, for Volvo, for Fiat, for LandRover, for Seat, for Skoda, for Audi, for Porsche, for SAAB, for Jaguar, for Euro Ford, for Romeo.Specifications: Screen 3.5” TFT LCD Display Input Voltage Range 9-15V Connection 16-PIN DLC Operating Temperature 0 ~ 50℃ Storage Temperature -20 ~ 70°C External Dimension 7.4” (L) ×4.17” (W) ×1.08” (H)PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery details Shipping Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse. From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping Delivery time varies from 2 to 6 business days. From our China warehouse via UPS DHL or Fedex Delivery time varies from 5-12 business days. We will ship according to your payment address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any.Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement.If after 30 days, or the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement. About usWho We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact usOur customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.

Price: 19.9 USD

Location: Perth Amboy, New Jersey

End Time: 2024-09-07T06:03:08.000Z

Shipping Cost: 0 USD

Product Images

LAUNCH X431 VII+ & CR319 OBD2 Diagnostic Tool Scanner Auto Code Reader ABS SRS

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Brand: LAUNCH

Manufacturer Part Number: as CRP123 CR3001

Vehicle Type: Passenger Vehicle

OBD Interface: CAN, EOBD, OBDII, OBD

Supported System: Full OBD2 functions, Universal OBDII Scan

Connectivity: OBDII

Type: Code Reader Scanner

Warranty: 5 Year

Update: Life-time free update

Material: Original and Premium

Features: Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly, Compact design, Plug and Play, Easy-to-use keypad, DTC Lookup Library, Live Data Stream, EVAP Test, Vehicle Information, I/M readiness, O2 Sensor Test, On-Board Monitor

Similar Models 1: LAUNCH CR419 ,LAUNCH CR519 ,LAUNCH CR3001

Similar Models 4: LAUNCH CR5001 ,LAUNCH CR4001 ,LAUNCH CR6001

Model1: LAUNCH X431 CR319

Model2: LAUNCH X431 VII+

Accessories: Adapter Cable, USB Cable, User Guide