O Scale PL Signal - 1 Aspect Lower Signal

Description: These are the most authentic PL signals available! These signals bring a real-life mechanical assembly down to scale sizes, all with fully functional lights. Based on the traditional Pennsylvania Railroad design, these signals measure a scale 52" tall. These fully-functional signals feature built-in LEDs with long pigtails, meaning you can very quickly add new lighting details to your model railroad or diorama. These signals also feature a thin latex mask over each lens, meaning the signals are ready for paint right out of the package. Simply paint and weather the signal to match the desired style, then carefully remove the masking with a pair of fine tweezers. No longer do you need to worry about overspray onto the lighted lenses. Each signal also comes with two different mounting bracket options, making it easy to route the wires as needed. Available in 1, 2, and 3 aspect variations, we have exactly what you need to complete your railroad or diorama!Key Details At-A-Glance Color: White Light Color: Yellow Number of Wires 3 Aspect: 14 2 Aspect: 10 1 Aspect: 6 Wire Length: About 2 Feet Wire Gauge: 30 AWG Operational Voltage Range: 5 VDC to 12 VDC Current-Limiting Resistor Value: 560 ohms Installation Instructions We recommend painting these signals before installation. Our signals come with a pre-applied latex masking over each lens. This means that you can use any paint method you like, then once the paint is applied, simply pop off the latex masks with a toothpick or a pair of fine tweezers. This reveals the pristine lenses beneath, untouched by paint overspray. Our signals require current-limiting resistors to work properly, which are included. If the signal is connected to power without a resistor in place, this will instantly damage the signal. To safely power the signal, connect one end of each resistor to one of the colored wires, then connect the other end of each to power or the controller. Then connect the black wires to zero volts. The resistors included with the light are designed to work with power supplies up to 12 volts. Note that each signal has separate connections for each individual LED. To achieve different realistic signal aspects, multiple LEDs need to be connected at a time. Signal operation is not necessarily plug-and-play; you need to have an understanding of the controller in use as well as the accurate signal aspects. LED Technical Data Brightness Rating: 10 mcd Diode Voltage: 2 VDC Maximum Rated Current: 20 mA LED Wavelength: 585 nm

Price: 14.95 USD

Location: Sparta, New Jersey

End Time: 2024-09-04T17:33:11.000Z

Shipping Cost: 5.99 USD